How much does it cost to drywall a 2000 square foot house?

For example, a house with 2,000 square feet of floor space and eight foot high ceilings may require anywhere between 8,000 and 9,000 square feet of drywall.

How much does a 4 by 8 sheet of drywall cost?

Drywall Prices The average price for drywall and sheetrock is $15 per 4′ x 8′ panel, with a typical range of $12 to $20 per panel. This translates into a cost of $0.40 to $0.65 per square foot. For walls and ceiling for a 200 square-foot room, you can expect to pay $300 to $500.

How much is a 4×8 sheet of drywall at Lowes?

For general purposes, drywall currently runs close to $2 per square foot for labor and materials. For example, to hang a 4 x 8 sheet of drywall, expect a cost of approximately $65. Estimate approximately $100 for a 4 x 12 sheet.

How much does a 4 by 8 sheet of drywall weigh?

around 57 pounds

Can you buy 4×4 sheets of drywall?

4×4 Damaged Sheets of Drywall. Various Thicknesses and Styles. Perfect for small patch jobs.

Will Home Depot cut drywall for you?

Home Depot will cut both wood and sheetrock to you specifications when you purchase it at their stores. A few cuts are normally free, but if you have an extensive cutting requirement, they may charge extra.

Is there a difference between sheetrock and drywall?

Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.

Will Home Depot cut sheetrock to size?

Yes, both Home Depot and Lowes employees can score / cut drywall for you in the store, before checking out. You can also do this yourself if you have a utility knife. Then cut the remaining paper on the opposite side to detach the drywall so you’ll now have a smaller piece.

What side do you cut drywall on?

After measuring your drywall, lay a T-Square on the right side of the material. Use a pencil to draw a scoring line. With a sharp utility knife or other cutting tool, follow the pencil line and lightly cut through the paper layer of drywall.

How much gap should be between sheets of drywall?

Unfortunately, there is no retroactive fix. However, during installation, be diligent about keeping that 1/8-inch space between sheets by using a guide. The blade of a drywall square is about 1/8-inch thick and does the trick. Thin strips of wood can also be used as spacing guides.

Should drywall touch the floor?

3 Answers. Drywall should definitely not touch concrete as moisture will wick (ie flow up the surface as in a candle/lamp wick) into the drywall and encourage mold growth. 3/8″ should be sufficient – your prop up plan is not only appropriate, but a common technique used by drywallers.

Should I hang drywall vertical or horizontal?

On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. However, on residential jobs, the drywall on the walls is typically hung horizontally.

Can you hang drywall on 24 centers?

Always use 5/8 on 24″ centers. You can rent a drywall lift from “The Big Boxes” for about $30 a day so you won’t kill your back trying to lift & shift the rock. If you use 1/2 it will sag eventually. When it sags you will get the “Amphitheater look” between each joist.

Why do you hang drywall from the top down?

When hanging drywall, always hang the ceiling first. This is the hardest drywall to hang, so get a partner and go slow. Large cracks due to misaligned sheets are hard to repair because the extra mud required to fill them will constantly fall out and drop to the floor (or worse, down the back of your neck!).

How much does drywall cost to hang and finish?

Drywall Costs Drywall installation costs $1,834, with a typical range of $1,004 and $2,877. This translates into a price of $1 to $3 per square foot for materials and labor. Most homeowners pay $2 per square foot, depending on the number of rooms and the level of finish.

How much drywall can man hang in 8 hours?

A standard output average (on a wall that already has studs) is to hang between 4 and 5 sheets of drywall per hour, or between 35 and 40 sheets in an 8-hour day.

How do I estimate a drywall job?

Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you’re using 4-by-8 sheets) or by 48 (if you’re using 4-by-12 sheets). If you want to get the cost, just multiply the total number of sheets by the price per sheet. Remember to add local taxes and delivery charges.

How much does it cost to drywall 1500 square feet?

Our page on Average Drywall Installation Cost & Prices shows that the cost to drywall a house per square foot is roughly $1.30 – $4.00 per square foot….

How much does it cost to drywall 1000 square feet?

For this reason, drywall installation has a range of associated costs. The national average cost to install drywall is between $1,500 and $2,000, with most homeowners spending around $1,750 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel.

How much does it cost to Drywall 600 square feet?

Add the areas together: 180 + 270 + 150 = 600 total square feet. Round up: 16.67 = 17 sheets. Add 2 sheets for waste: You’ll need 19 total sheets.

How many sheets of drywall do I need for 1000 square feet?

After you find the square footage of drywall needed, simply divide by the square footage of the sheet size you will be using to find the number of sheets needed. For example, if your wall surface is 1000 square feet and you’re using 4′ x 8′ sheets, then the number of sheets needed is 1000 / 32, or 31.25.

How much does it cost to drywall a 1000 sq ft basement?

Average Cost Per Square Foot to Finish a Basement

What is the average cost to mud and tape drywall?

$0.80 per square foot

How do you figure board feet in drywall?

The formula for calculating board feet is first to multiply thickness by width by length — in inches. Then divide the total by 144 for the total board footage of a given board.

What are the 5 levels of drywall finish?

Here are the details!

• Drywall Level 0. No taping, finishing, or accessories.
• Drywall Level 1. Single coat with taping set in a joint compound on all joints and interior angles.
• Drywall Level 2.
• Drywall Level 3.
• Drywall Level 4.
• Drywall Level 5.

How do you hang drywall on a 10 foot wall?

For a 10 foot wall, I would put a two foot rip on the bottom, cut edge down and then two four foot runs tapered edge to tapered edge. This allows you to let the lower sheets support the uppers, and puts the two tapered joints at a convenient height to finish with the lower one behind furniture, etc.

Is a square foot and a board foot the same?

A board foot is one square foot, one inch thick. To calculate board foot = width in inches x length in feet x thickness in inches. A square measurement is the 2-dimensional derivative of a lineal measurement, so a square foot is defined as the area of a square with sides 1 foot in length.

How many square feet will 1000 board feet cover?

All Volume – Lumber Conversion Tables

What is the board foot formula?

Board footage is calculated by multiplying the nominal thickness in inches (T) by the nominal width in inches (W) by the actual length in feet (L) and dividing by 12. The formula is: T x W x L = Board ft.